Jump to content
Forum Windows-az.com

Adobe Illustrator CC 2015 aktivasiyası necə olur?


Odərli
 Share

Recommended Posts

Salam, dostlar Adobe Illustrator CC 2015 aktivasiyasın tamamladığım yerdə notebook restart oldu və yarımçıq qaldı, onu necə tamamlaya bilərəm?

 

 

1. İnterneti söndürürük.

2. Quraşdırmaya başlayırıq, "Install-ı" seçirik. "Sing In-i" sıxırıq. Səhv çıxacaq.  "Connect Later-i" sıxırıq. 
3. "xf-adobecc2014.exe-i" açırıq və IL CC üçün serial yaradırıq. Onu quraşdırmanın pəncərəsinə köçürürük ( keygen-i bağlamırıq!). Qoşulma səhvi çıxacaq - "Connect Later-i" sıxırıq. 
 
4. PR-ı buraxırıq. Təsdiq edirik ki, bizdə internetlə problemlər var ("Having trouble connecting to the internet?"). "Offline Activation-u" sıxırıq => "Generate Request Code".
 
5. "Request" sahəsində keygen pəncərəsinə "Offline Activation" pəncərəsindən "Request Code-u" qoyuruq.
"Generate-ı" sıxırıq.
 
6. Aktivləşdirmənin ("Activation" sahəsi) alınmış kodu "Offline Activation" pəncərəsində "Response Code" sahəsində köçürürük və "Activate-ı" sıxırıq. 
 
Hosts-da ("%SystemRoot%\System32\drivers\etc") bunları qeyd edirik:
 
127.0.0.1 lmlicenses.wip4.adobe.com
127.0.0.1 lm.licenses.adobe.com
127.0.0.1 na1r.services.adobe.com
127.0.0.1 hlrcv.stage.adobe.com
127.0.0.1 practivate.adobe.com
127.0.0.1 activate.adobe.com
 
7. İnterneti qoşuruq,  proqramı açırıq

 

Link to comment
Share on other sites

Mən bunları nədənsə hosta əlavə edə bilmədim, niyə görəsən?

 

 

6. Aktivləşdirmənin ("Activation" sahəsi) alınmış kodu "Offline Activation" pəncərəsində "Response Code" sahəsində köçürürük və "Activate-ı" sıxırıq. 

 
Hosts-da ("%SystemRoot%\System32\drivers\etc") bunları qeyd edirik:
 
127.0.0.1 lmlicenses.wip4.adobe.com
127.0.0.1 lm.licenses.adobe.com
127.0.0.1 na1r.services.adobe.com
127.0.0.1 hlrcv.stage.adobe.com
127.0.0.1 practivate.adobe.com
127.0.0.1 activate.adobe.com
Link to comment
Share on other sites

Məndə host fayılının içində bunlar var:

 

 

# Copyright © 1993-1999 Microsoft Corp.

#
# This is a sample LMHOSTS file used by the Microsoft TCP/IP for Windows.
#
# This file contains the mappings of IP addresses to computernames
# (NetBIOS) names.  Each entry should be kept on an individual line.
# The IP address should be placed in the first column followed by the
# corresponding computername. The address and the computername
# should be separated by at least one space or tab. The "#" character
# is generally used to denote the start of a comment (see the exceptions
# below).
#
# This file is compatible with Microsoft LAN Manager 2.x TCP/IP lmhosts
# files and offers the following extensions:
#
#      #PRE
#      #DOM:<domain>
#      #INCLUDE <filename>
#      #BEGIN_ALTERNATE
#      #END_ALTERNATE
#      \0xnn (non-printing character support)
#
# Following any entry in the file with the characters "#PRE" will cause
# the entry to be preloaded into the name cache. By default, entries are
# not preloaded, but are parsed only after dynamic name resolution fails.
#
# Following an entry with the "#DOM:<domain>" tag will associate the
# entry with the domain specified by <domain>. This affects how the
# browser and logon services behave in TCP/IP environments. To preload
# the host name associated with #DOM entry, it is necessary to also add a
# #PRE to the line. The <domain> is always preloaded although it will not
# be shown when the name cache is viewed.
#
# Specifying "#INCLUDE <filename>" will force the RFC NetBIOS (NBT)
# software to seek the specified <filename> and parse it as if it were
# local. <filename> is generally a UNC-based name, allowing a
# centralized lmhosts file to be maintained on a server.
# It is ALWAYS necessary to provide a mapping for the IP address of the
# server prior to the #INCLUDE. This mapping must use the #PRE directive.
# In addtion the share "public" in the example below must be in the
# LanManServer list of "NullSessionShares" in order for client machines to
# be able to read the lmhosts file successfully. This key is under
# \machine\system\currentcontrolset\services\lanmanserver\parameters\nullsessionshares
# in the registry. Simply add "public" to the list found there.
#
# The #BEGIN_ and #END_ALTERNATE keywords allow multiple #INCLUDE
# statements to be grouped together. Any single successful include
# will cause the group to succeed.
#
# Finally, non-printing characters can be embedded in mappings by
# first surrounding the NetBIOS name in quotations, then using the
# \0xnn notation to specify a hex value for a non-printing character.
#
# The following example illustrates all of these extensions:
#
# 102.54.94.97     rhino         #PRE #DOM:networking  #net group's DC
# 102.54.94.102    "appname  \0x14"                    #special app server
# 102.54.94.123    popular            #PRE             #source server
# 102.54.94.117    localsrv           #PRE             #needed for the include
#
# #BEGIN_ALTERNATE
# #INCLUDE \\localsrv\public\lmhosts
# #INCLUDE \\rhino\public\lmhosts
# #END_ALTERNATE
#
# In the above example, the "appname" server contains a special
# character in its name, the "popular" and "localsrv" server names are
# preloaded, and the "rhino" server name is specified so it can be used
# to later #INCLUDE a centrally maintained lmhosts file if the "localsrv"
# system is unavailable.
#
# Note that the whole file is parsed including comments on each lookup,
# so keeping the number of comments to a minimum will improve performance.
# Therefore it is not advisable to simply add lmhosts file entries onto the
# end of this file.
 
 
 
 

 

İndi mən bu əlavəni hansı hissənin altından yazmalıyam?

 

 

127.0.0.1 lmlicenses.wip4.adobe.com

127.0.0.1 lm.licenses.adobe.com
127.0.0.1 na1r.services.adobe.com
127.0.0.1 hlrcv.stage.adobe.com
127.0.0.1 practivate.adobe.com
127.0.0.1 activate.adobe.com
Link to comment
Share on other sites

  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • loading...
×
×
  • Create New...